Journal of sustainable Energy Systems

Journal of sustainable Energy Systems

Energy Optimization in a Residential Building in Isfahan with an Emphasis on Building Materials

Document Type : Original Article

Authors
Zahra Setayesh Khah 1
Ghanbar Ali Sheikhzadeh 2
Javad Divandari 3
1 M.Sc. in Architecture and Energy, Research Institute for Energy, Water and Environment, University of Kashan, Kashan, Iran
2 Professor, Department of Mechanical Engineering, University of Kashan, Kashan, Iran
3 Assistant Professor, Department of Architecture, University of Kashan, Kashan, Iran
10.22059/ses.2026.413177.1231
Abstract
Managing and reducing energy consumption in residential buildings located in hot–dry climates is a fundamental requirement for sustainable urban development. This study aims to evaluate and optimize the energy performance of the building envelope by modifying its materials and physical components. A typical residential building in District 4 of Isfahan was selected as a representative case of prevailing construction practices. Thermal modeling and building energy simulations were conducted using specialized simulation software. To accurately assess the energy-saving potential, reductions in energy consumption were classified into two categories: methodological reductions and reductions resulting from physical envelope interventions. The results indicated that refining the model’s thermal zoning by realistically representing common and occupied spaces reduced the calculated annual energy use intensity from 137.45 to 104.50 kWh/m²·year, corresponding to a 23.97% methodological reduction. Subsequently, the implementation of envelope optimization scenarios—including intermediate insulation of external walls, the application of a reflective cool roof, lightweight internal walls, and triple-glazed windows—further reduced annual energy use intensity to 96.64 kWh/m²·year, representing an actual reduction of 7.52% relative to the revised baseline model. Moreover, integrating the optimized envelope with active solar systems—namely, photovoltaic panels installed at an optimal tilt angle of 38° and a solar water-heating system—reduced the final annual energy use intensity to 90.80 and 85.10 kWh/m²·year, respectively. Ultimately, the optimized model achieved Energy Class B in accordance with the requirements of Part 19 of the Iranian National Building Regulations. The findings provide prioritized passive envelope design strategies and active solar solutions for developing low-energy residential building models in hot–dry climates.
Keywords
Hot and Dry Climate
Building Energy Simulation
Building Materials
Energy Consumption Optimization
Subjects
[1] International Energy Agency. Energy Efficiency 2022. Paris: IEA; 2022.
[2] Givoni B. Climate considerations in building and urban design. New York: John Wiley & Sons; 1998.
[3] Santamouris M. Cooling the buildings: past, present and future. Energy Build. 2016;128:617-638. doi:10.1016/j.enbuild.2016.07.034.
[4] Ozel M. Effect of insulation location on dynamic heat transfer characteristics of building external walls. Energy Build. 2011;43(8):2163-2168. doi:10.1016/j.enbuild.2011.04.027.
[5] Meerow S, Newell J, Stults M. Defining urban resilience: a review. Landsc Urban Plan. 2016;147:38-49. doi:10.1016/j.landurbplan.2015.11.011.
[6] UN-Habitat. World Cities Report 2020: The value of sustainable urbanization. Nairobi: United Nations; 2020.
[7] Crawley DB, Hand JW, Kummert M, Griffith BT. Contrasting the capabilities of building energy performance simulation programs. Build Environ. 2008;43(4):661-673. doi:10.1016/j.buildenv.2006.10.027.
[8] Attia S, Hensen J, Beltrán L, De Herde A. Selection criteria for building performance simulation tools. Build Environ. 2012;54:25-34. doi:10.1016/j.buildenv.2012.02.006.
[9] Esfandiari A, Shokri E. Evaluation of the role of spatial layout on visual quality and daylight indicators in residential interior spaces in Isfahan. Karafan Sci Q. 2022;19(4):255-276. [Persian]
[10] Hu M, Xiao Y, Cao J, et al. The effects of passive design on indoor thermal comfort and energy savings for residential buildings in hot climates: A systematic review. Urban Clim. 2023;49:101466. doi:10.1016/j.uclim.2023.101466.
[11] Holling CS. Resilience and stability of ecological systems. Annu Rev Ecol Syst. 1973;4:1-23.
[12] Vale LJ, Campanella TJ. The resilient city: how modern cities recover from disaster. Oxford: Oxford University Press; 2005.
[13] Kumar D, Alam M, Sanjayan J. Comparative analysis of building insulation material properties and performance. Renewable Sustainable Energy Rev. 2020;131:110038. doi:10.1016/j.rser.2020.110038.
[14] Alwetaishi M. Impact of glazing to wall ratio on energy consumption of buildings in hot regions. Energies. 2019;12(11):2164. doi:10.3390/en12112164.
[15] Wang Y, Wang J, Zhang Y. A Comprehensive Review on Technologies for Achieving Zero-Energy Buildings. Sustainability. 2024;16(24):10941. doi:10.3390/su162410941.
[16] Cabeza LF, Castell A, Barreneche C, de Gracia A, Fernández AI. Materials for using solar energy in buildings: PCM-concrete and PCM-brick walls. Sol Energy. 2011;85(7):1505-1511. doi:10.1016/j.solener.2011.04.015.
[17] Naghipour A, et al. Adobe versus concrete: Passive energy analysis in residential buildings in the hot and arid climate of Kashan city. Building Engineering. 2026;6(1):be4029. doi:10.59400/be4029.
[18] Kibert CJ. Sustainable construction: green building design and delivery. Hoboken: John Wiley & Sons; 2016.
[19] Ismail AM, et al. Enhancement Techniques for the Reduction of Heating and Cooling Loads in Buildings: A Review. J Energy Power Technol. 2023;5(4):031. doi:10.21926/jept.2304031.
[20] Clarke JA. Energy simulation in building design. 2nd ed. Oxford: Butterworth-Heinemann; 2001.
[21] Kolokotsa D, Rovas D, Kosmatopoulos E, Kalaitzakis K. A roadmap towards intelligent net zero and positive energy buildings. Sol Energy. 2011;85(12):3067-3084. doi:10.1016/j.solener.2010.09.023.
[22] Santamouris M, Kolokotsa D. Passive cooling dissipation techniques for buildings and other structures. Energy Build. 2015;94:2-13. doi:10.1016/j.enbuild.2015.02.042.
[23] Ministry of Roads and Urban Development. National building regulations of Iran: Topic 19 – Energy conservation. 5th ed. Tehran: Office of National Building Regulations; 2020. [Persian]
Journal of sustainable Energy Systems
Volume 5, Issue 4
Autumn 2026
Pages 809-831